2017 Interceptor Utility a NY police department.

This was my first project I was given at my new job. I cant disclose allot of information because of legal agreements of where I work but Here is the car its self.
20170328_141536.jpg
It was a relatively simple build. Here's some of the products that went into it
20170328_151025.jpg 20170329_093644.jpg 20170331_085745.jpg
Whelen 295slsa6 and speaker
Whelen Liberty II
Whelen UHF 2150A Headlight flasher
MNStar Installer Level 2 Harness
Setina rear cargo cage and front partition
Pro Guard Pushbar with Whelen 8 head Dominator
Pro guard door skins and window bars
4 Whelen Vertex
2 surface mount Ions
First thing I worked on was getting all the harnesses ran, starting with the MNStar harness thyen getting the Lightbar on the roof and running that harness.
20170329_093330.jpg 20170329_093347.jpg 20170329_095957.jpg
After all that was done I started with the front getting the pushbar brackets on and wiring up the HLF. Now the MNStar harness had more than enough wires that i needed all I needed to do was pull one of the grounds and 2 acc. wires out from just behind the front fascia after putting it back on, leaving the top of it loose. After mounting the pushbar, and the dominater to the top bar, I had to mark and mount 2 red Ions to the side of it and run the wires to the left side being that is where the harness was for the D8. I ran that whole harness through the lower grill and up to the top where i Tied them in and zip tied away the slack.
20170330_093632.jpg 20170330_111254_010_01.jpg
After testing the front I saw the blue in the dominator and found out later, Pro guard sent the wrong one. (I later replaced just the 4 light heads)
Moving to the rear I drilled the 2 holes in the tail lights for the vertex and wired those up. Again having more wire than I needed in that harness i taped off and coiled away the extra.
20170329_140144.jpg
Last for the wiring was the siren box. Very easy to work with, being there was Very little equipment. The department was installing their own console so I had the leave the 295 siren loose on the center plate tucking the wire slack behind the accessory panel.
20170331_085434.jpg
After all the wiring was done I went to the cages and they needed a little wrestling but went in pretty straight forward. then last the door skins
20170331_082045.jpg 20170331_082052.jpg 20170331_112649.jpg 20170331_082504.jpg 20170331_082809.jpg
Let me know if you guys want to see any more of these, I work on them every day and don't mind sharing. Any questions on how I did anything, feel free to ask.
 
Last edited:

tsquale

Lifetime VIP Donor
Oct 12, 2010
10,511
Minnesota, USA
Looks nicely done! I personally enjoy when members take the time to thoroughly document the work they do, so keep posting!
 

Forum Statistics

Threads
53,967
Messages
449,816
Members
19,104
Latest member
airflores

About Us

  • Since 1997, eLightbars has been the premier venue for all things emergency warning equipment. Discussions, classified listings, pictures, videos, chat, & more! Our staff members strive to keep the forums organized and clutter-free. All of our offerings are free-of-charge with all costs offset by banner advertising. Premium offerings are available to improve your experience.

User Menu

Secure Browsing & Transactions

eLightbars.org uses SSL to secure all traffic between our server and your browsing device. All browsing and transactions within are secured by an SSL Certificate with high-strength encryption.