TritonBoulder47
Member
Just to verify what I'm fairly certain is correct...
Wiring for a feniex fusion dual color dumb head is as follows:
Red - Constant Powet
Black - Ground
Yellow & Blue - Triggers for the 2 colors
I tried hooking them up as above earlier today for an addition for my build, using a Whelen ULF-44 as the flashing source. When I activated my flasher, the lightheads just came on steady in both modes and would occasionally blink, but not flash with the flasher...
Just making sure that I have then run right, or maybe they don't play nice with the ULF-44...
Wiring for a feniex fusion dual color dumb head is as follows:
Red - Constant Powet
Black - Ground
Yellow & Blue - Triggers for the 2 colors
I tried hooking them up as above earlier today for an addition for my build, using a Whelen ULF-44 as the flashing source. When I activated my flasher, the lightheads just came on steady in both modes and would occasionally blink, but not flash with the flasher...
Just making sure that I have then run right, or maybe they don't play nice with the ULF-44...