So I've got an SNM 6 head warning/traffic bar and a Feniex fusion visor bar and some T3s.
I'm just wondering what fuse setup is recommended?
To my understanding it'd go:
Battery --> Fuse Box --> Switches --> Lights
Looking into a blue sea fuse block. What specific fuses would I want to run?
Thank you!! Very useful info, I appreciate itIMHO, I'd use a circuit breaker less than 5 inches from the battery
Battery -->Circuit breaker --> Fuse Box --> Switches --> Lights
SNM = 10 amp fuse ( https://www.strobesnmore.com/assets/images/PDF/E66MAX-warning-traffic-install-guide.pdf )
Fusion Bar = 7.5 amp fuse (https://www.feniex.com/uploads/products/media/IM_FusionInteriorLightbar_2.0_Ew10w.pdf)
T3 = 1amp per each T3 = total amps needed (https://www.feniex.com/uploads/products/media/manual_46_1.pdf)
For the Circuit breaker add total amps and multiply by 125%. (ie. 10+7.5+4x125%=26.8amps; 30Amp circuit breaker)
I'd go with a 60 amp circuit breaker or 80 amp for future growth, to add more equipment (lights, siren, etc.) to the system.
We've found that the circuit breaks are better then a fuse off the battery