I'll be the first to admit it, I believe I've bit off more than I can chew.
I just purchased a new POV and am starting to put lighting equipment in it. The list below is what I've purchased so far.
Havis Chargeguard
Blue Sea 12-Circuit Fuse Block
Feniex Typhoon Handheld w/ Triton Speaker
(2) Strobes n More 180° Crescents
(2) Strobes n More Triple Threat Dash Lights
(1) Strobes n More Dual Threat Dash Lights
My plan, at this time, is to run an 8 gauge power wire from the battery to the Havis Chargeguard that'll be in the interior of the vehicle. The Blue Sea fuse block will then be connected to the Chargeguard. The Feniex Typhoon will be connected to the fuse block and the lights connected to the Typhoon.
My confusion, though, lies with the lights. I'd like one button on the Typhoon to control the front lights and another to control the rear lights. So is it possible to connect to multiple lights to one of the switches on the siren?
In addition, the wiring guide for the crescent light shows:
Black - 12v Ground Wire (self explanatory)
Red - 12v Activation Color 1
Brown - 12v Activation Color 2
Green - 50% Power + 12v
Yellow - Sync/Flash Pattern
White - Alternating Patterns
Color 1 is the primary color, so I assume I'll be connecting it to the front lights button with the remainder of the lights. Color 2 is the white flood, so I'll connect it to its own override button. But what in the hell is green? And I know yellow is sync, but where do y'all usually connect those cables? Closer to the switch box or closer to the lights?
And lastly, I'll be cutting the cigarette lighter adapter off of the dash lights. What can I expect to find?
Thanks in advance and I apologise in advance for being so entirely ignorant.
I just purchased a new POV and am starting to put lighting equipment in it. The list below is what I've purchased so far.
Havis Chargeguard
Blue Sea 12-Circuit Fuse Block
Feniex Typhoon Handheld w/ Triton Speaker
(2) Strobes n More 180° Crescents
(2) Strobes n More Triple Threat Dash Lights
(1) Strobes n More Dual Threat Dash Lights
My plan, at this time, is to run an 8 gauge power wire from the battery to the Havis Chargeguard that'll be in the interior of the vehicle. The Blue Sea fuse block will then be connected to the Chargeguard. The Feniex Typhoon will be connected to the fuse block and the lights connected to the Typhoon.
My confusion, though, lies with the lights. I'd like one button on the Typhoon to control the front lights and another to control the rear lights. So is it possible to connect to multiple lights to one of the switches on the siren?
In addition, the wiring guide for the crescent light shows:
Black - 12v Ground Wire (self explanatory)
Red - 12v Activation Color 1
Brown - 12v Activation Color 2
Green - 50% Power + 12v
Yellow - Sync/Flash Pattern
White - Alternating Patterns
Color 1 is the primary color, so I assume I'll be connecting it to the front lights button with the remainder of the lights. Color 2 is the white flood, so I'll connect it to its own override button. But what in the hell is green? And I know yellow is sync, but where do y'all usually connect those cables? Closer to the switch box or closer to the lights?
And lastly, I'll be cutting the cigarette lighter adapter off of the dash lights. What can I expect to find?
Thanks in advance and I apologise in advance for being so entirely ignorant.