Thanks! You don't have a schematic by chance, do you? Curious what the PN is on the box itself?They did make a switch box but they do not require anything special. Just 4 switches to create the different patterns. Not for sale, just reference.View attachment 243796
It is just basic switches, not any type of controller. The model number is on the box it is sitting on.Thanks! You don't have a schematic by chance, do you? Curious what the PN is on the box itself?
They did make a switch box but they do not require anything special. Just 4 switches to create the different patterns. Not for sale, just reference.View attachment 243796
I was really looking for a box with LEDS that would mimic the pattern that thee light bar is set to.
I need to figure out a simple way to get the four "traffic director" functions set with switches/wiring without scrolling through a bunch of patterns to get there.
Left Scroll/direction
Right scroll/direction
All Flash
All Steady Burn
Seems that I can't access the PDF mentioned above - "You do not have permission to view this page or perform this action."As far as the documentation several of us linked shows how to configure the "Traffic Director" modes.
I would mainly recommend perhaps looking at the TDWLInstructions PDF linked by @tsquale, page 7 of the manual (page 8 of the PDF), the wiring schematics looks similar to other more basic detail pages of a TD/WL36, so there's a good chance the program board on it is the same as far as wire combinations go if your wire colors on your bar match up with what's in that manual.
Could you maybe link a photo of the end wire points of your light just to see what they might match up as to one of the manuals?
Check the PDF's in tsquale's reply, not my other reply. The PDF's in the one topic I posted apparently are all broke but he re-uploaded some of them in this comment above;Seems that I can't access the PDF mentioned above - "You do not have permission to view this page or perform this action."